Fender TWIN? Professional Tube Amplifier in Phoenix, Arizona For Sale

100 Watt Fender TWIN? Amp
Gently used and in perfect mint condition. I am the original owner and purchased it from Guitar Center in xxxx. This amp was only used for home playing and has never been "gigged" although it is certainly capable and boasts the Fender Groove tubes.
Kept in a Smoke Free home and taken extremely well care of.
This amp is in mint cosmetic and electronic condition. Comes with a foot switch and works perfectly. Also comes with casters. Original box included.
The Fender TWIN? is the next step up in the evolution of High Performance instrument amplification. The new TWIN is a direct descendent of classic tube amps such as the Fender Twin Reverb®,and 410 Bassman®, which have shaped today?s world of guitar amps.
The features of the new Fender TWIN? provide flexibility rarely found in tube amplifiers. Channel One is the traditional Fender design which offers the vintage sound as well as contemporary sounds with the use of switch-selectable Gain and Master Volume controls.
Channel Two is like owning a second, modern hot-rodded amp with more soaring gain than previously found in a Fender tube amp. The CLASSIC Fender tube reverb sound is there too and is switch assignable to Channel One, Channel Two, or both. Finally, a master PRESENCE control allows you to ?dial-in? just the right amount of highend sparkle.
Special effects will interface to the Effects Loop easily and with no guesswork on levels. Simply set the three position LEVEL SELECT switch to match up to the latest rack-mount digital processor or your old favorite battery powered effect pedals. The effects MIX control is used for blending the effect (wet) sound with the normal (dry) guitar sound. Depending on the effects device used, the effects MIX control, when set to ?10?, will produce the ?wet? sound only.
A three position switch is provided for assigning the Effects Loop to Channel A, Channel B, or both. In addition, the PREAMP OUT & POWER AMP IN jacks can be used as a second effects loop, or as Send and Return points while slaving amps together. The possibilities are endless (e.g., by inserting a Chorus pedal between the PREAMP OUT of an amp and the POWER AMP IN of another, a true stereo image effect can be achieved).
The power amplifier section of the TWIN is a 100 Watt Fender design which has become the industry standard as a result of its time worn reputation for reliability and good sound; however, this amplifier goes further than its clones. In addition to a HIGH/LOW POWER switch, that you can hear, the TWIN also features external bias and balance adjustment capability. The four 6L6WGC/xxxx output tubes can be set up by anyone with a digital voltmeter without removing the chassis. This means that you can re-bias every time you re-tube and can check bias and balance over the life of the tubes. With the price of tubes today you can?t afford not to have them set up right every time. In addition to being able to drive a wide range of speaker combinations from the three speaker output jacks, switch selectable to 4, 8, or 16 ohms, the BALANCED LINE OUTPUT will drive any 600 ohm line input. This is a transformer coupled, truly balanced, floating ground output which is particularly useful for driving slave power amps or, with the proper equalization, as a send to a mixing console for recording or sound reinforcement.
The Fender TWIN? features two Fender Special Design 12? speakers which have been specifically tailored to reliably produce the legendary Twin Reverb sound.
The selection of a Fender amplifier will reward you with years of quality music in a wide range of controlled sounds. This manual is designed to familiarize you with the equipment and to acquaint you with its many fine features. Please read it carefully so that you will benefit from the many features as soon as you start using the amplifier.
The built-in quality of a Fender amplifier is the result of over four decades of dedication in the combined skills of research and development by our engineers and musicians.
Specifications:
PART NUMBER: 120V version: 21-xxxx
230V version: 21-xxxx
TYPE: PR 266
DIMENSIONS: Height: 20-3/4? (52.7 cm)
Width: 26-3/8? (67 cm)
Depth: 11-1/2? (29.2 cm)
Weight: 77 lbs. (35 kg)
POWER REQUIREMENT: 120V version: 120 volts AC, 60 Hz, 360 watts.
FUSE TYPE: 100V and 120V versions: 4A SLO-BLO, 125V min.
INPUT IMPEDANCE: Input 1: 1M ohm.
Input 2: 136k ohm.
EFFECTS LOOP: Pre reverb.
Nominal level: +2, -5.5, -13 dBV.
Output impedance: 4.2k ohm maximum.
Input impedance: 130k ohm minimum.
EFFECTS MIX CONTROL: Continuously variable between the signal at the EFFECTS SEND and EFFECTS RETURN jacks.
REVERB: Post effects loop.
PRE-AMP OUT: Post reverb, +1.3 dBV nominal level.
Recommended load: 22k ohm minimum.
POWER AMP IN: +1.3 dBV sensitivity, 130k ohm input impedance.
BALANCE LINE OUTPUT: Derived from the output transformer, fully balanced.
+3 dBV nominal level into 600 ohms or greater.
Pin 1 floating, pin 2 (+), pin 3 (-).
AMPLIFIER LOAD IMPEDANCE: Switch selectable for 4, 8, or 16 ohms.
POWER OUTPUT: OUTPUT HIGH setting: 100 watts RMS, 5% THD.
into 4, 8 or 16 ohms. OUTPUT LOW setting: 25 watts RMS, 5% THD.
SPEAKER COMPLEMENT: Two Fender P/N xxxx88 Special Design 12? 8 ohm
speakers wired in series.
This amp sold new for over $1,200.00 and it is in perfect condition. Asking only $525.00 or best offer (OBO) in order to sell quickly.
Contact: (480) 528-xxxx