Adcom GTP600 5 Channel Surround / Preamp / Tuner in Phoenix, Arizona For Sale

GTP-600
The GTP-600 and the GTP-550 share the same operating circuitry and delay mode features. In fact, the internal components (resistors, capacitors, etc.) are almost identical. However the GTP-600 was designed with several upgraded features that create a discernible difference when compared to the GTP-550.
The GTP-600 includes the RC-65 "learning remote"(not included missing) that can be programmed to control up to eight additional audio or video components. The benefit is obvious. Rather than depending on a collection of remote controls, the GTP-600's simplified remote can easily operate an entire audio/video home theater system.
Aiding in this complete control of the components, the GTP-600 includes an on screen display for quick system set up and customized operation. The display shows the selected input, operating mode and delay choices and provides visual feedback to facilitate proper level adjustments.
The GTP-600 also accommodates a wider selection of input and output types by providing a full complement of S-video connectors to supplement the standard composite video jacks. These multi-conductor connections provide high resolution signal transfer for advanced televisions, laserdiscs and VCRs.
In addition, the GTP-600's rear panel RCA audio and video jacks are heavily gold plated to ensure maximum signal transfer and to minimize oxidation. Adcom's GTP-600 offers the highest levels of home theater performance at an equally amazing price.
Adcom GTP-550 and GTP-600 Technical Specifications
Preamplifier Section
Output Impedance
Main Outputs.....475ohms
Tape Outputs.....500ohms
Output level (Rated) .....2.0V
Input impedance.....25kohm
Frequency Response
20Hz to 20kHz +0. -0.5dB
THD+N at Rated Output
20Hz to 20kHz..... 100dB
Surround Modes
Left, Right, and Center Channel Line Outputs
20Hz to 20kHz.....+0, -0.5dB
THD+N at Rated Output (5 Channel Mode)
20Hz to 20kHz.....>0.005%
THD+N at Rated Output (Dolby Pro Logic Mode)
100Hz to 20kHz.....>0.05%
Signal to Noise Ratio
(All Surround Modes, Ref. to 2 volt)
"A" Weighted.....>95dB
Rear Channel Line Outputs
Frequency Response (5 Channel Mode, No Delay)
20Hz to 20kHz.....+0. -0.5dB
Frequency Response (All Modes With Delay)
20Hz to 7kHz.....+0, -3dB
THD+N at Rated Output (5 Channel Mode, No Delay)
20Hz to 20kHz..... 95dB
Signal to Noise Ratio (Ref. to 2 volt)
"A" Weighted.....>70dB
FM Tuner Section
Usable Sensitivity (Mono).....1.2 uV / 13 dBf
Quieting Sensitivity (5OdB)
Mono.....1.7uV / l6dBf
Stereo.....27 uv / 40 dBf
Signal To Noise (65dBf, "A" weighted)
Mono.....75dB
Stereo.....70dB
THD+N (1kHz, 65dBf)
Mono.....0.05%
Stereo.....0.09%
Capture Ratio.....1.5dB
Alternate Channel Selectivity (±400kHz).....>75dB
Separation (at 1kHz).....>50dB
Frequency Response (±0.5dB).....30Hz to 15kHz
AM Tuner Section
Sensitivity.....300uV/m
Selectivity (±10kHz).....> 40dB
Signal To Noise (5mV/m "A" Weighted).....>45dB
General
Power (available in 220V or 240V on special order)
120VAC/50-60Hz
Chassis Dimensions
4"(102mm) x 17"(432mm) x 11 1/2"(292mm)
Maximum Dimensions
4 1/4"(108mm) x 17"(432mm) x 12 3/4"(324mm)
Weight.....17 lbs. (7.7kg)
Weight, Packed.....20.5 lbs. (10.5kg)
Everything works as it should. Face is in perfect condition. Top has some light surface scratches and I do not have the remote. You can still control all functions without it. Asking $100.00 Firm... Call, Text or Email Larry 480-415-xxxx